How To Deal With Stone Problem About Spiral Stair Cracking And Stepping Reflection?
Stone spiral stair cracking
Stepping stone cracking, cracking
1. The stone is directly laid on the steel plate. When the stairs are used normally, the uneven force on
the stone surface may cause the steel stairs to vibrate and deform, resulting in cracks in the stone.
2. Different rebound forces are generated due to the difference in thickness, support point and spacin
g of the steel plate. The rebound force is greater than the adhesion between the mortar and the steel
plate, resulting in cracks in the stone.
Step back to the granite, 40*60 square tube base layer, with shock-absorbing strips on top
Stone stepping reflector
◆ common disease
The original design step reflective slot does not consider the reflection of the LED, resulting in a
clear reflection lamp on the ground, affecting the overall aesthetic effect.
The specular reflection of the ground stone was not considered in the pre-construction process,
resulting in obvious reflection of the ground bead after the LED was installed.
Add an acrylic visor to the bottom of the step reflector, pay attention to the thickness and
transparency of the acrylic.
A 3CM stone back strip is added to the bottom of the stone baffle plate of the stepping reflector,
and the LED light strip is fixed on the back strip to effectively prevent the LED from reflecting
on the ground.