Tel: +86-592-5762810


Bathroom Stone Cleaning And Maintenance
- Jun 28, 2018 -

    With the continuous improvement of people’s living standards, people are increasingly pursuing luxurious and upscale decorative effects in home decoration. Gradually using natural stone in home decoration has become a fashion, and its application range has gradually expanded to the bathroom The bathroom is decorated.

rustic-bathroom (1).jpg

    Bathroom stone cleaning and maintenance

    Natural stone is a kind of high-grade decorative material with natural beauty and unique texture. The surface of natural stone is fine and high in hardness, but due to its natural and mineral structure diversity, as well as many defects and problems in the stone itself. In fact, natural stone is very delicate. Natural stone needs not only to be careful when installing and laying, but also to pay attention to careful care and maintenance in daily use.

    Due to the special environmental conditions of toilets and bathrooms, their water vapor, moisture, mold and dirt, and often contact with detergents and other household chemicals, so the bathroom stone is very vulnerable to pollution, once the maintenance is not good, the surface of the stone will Corroded, become dull, and even stained lines and so on.

    Therefore, in daily life, care should be taken not to use shampoos containing dyes, not to use soaps and shampoos containing artificial colors, and to use non-acidic or alkaline detergents, and to clean the surfaces with neutral detergents. Make the surface of the stone dry, when the pollutants fall on the surface of the stone, wipe it clean immediately, and so on.


    Bathroom stone maintenance points

    1. Confirm the water hardness.

    Use soft water as much as possible during daily life and stone maintenance. Because hard water will leave deposits on the surface of the stone, these deposits will darken the surface and chemically react with the stone surface. Because the removal of these deposits requires the use of chemical products. Chemicals also damage the stone while removing the stain.


    2. Use permeable stone protectors to protect the stone.

    In order to reduce the water absorption rate of the stone and reduce the degree of adhesion between the sediment and the stone, it is the best way to use the permeability stone protection agent. Before the installation of stone, it is best to perform the following two protections: First, the internal protection of the stone, that is, the use of the permeability of the silicone resin for protection, to minimize the water absorption rate; second is the surface protection of the stone, ie Fluorine-containing polymers with water and oil repellency properties are used to reduce the damage to stone caused by mineral deposits and soapy water and other acidic or alkaline stains.


    3. Clean the stone surface in time after each use of the bathroom.

    At the same time, when cleaning, wash according to the specific circumstances to carry out targeted cleaning, that is, according to the type of stone, the use of the environment, the main source of pollution to choose the appropriate cleaning agent and cleaning method. If you do not know the specific situation and blindly choose the cleaning agent will cause stone damage, deterioration, yellowing, flooding and other different consequences.


    4. Regularly polish the marble surface

    After a period of use, if the local color of the marble surface becomes dark, even the damage is severe and the surface gloss disappears. This can be done with liquid polishing mixes (polishing powders and polishing solutions) for self-cleaning (DIY) polishing. Or choose a professional marble care company to help maintain the polish. It is best to be carried out after use for a period of time, usually once a year, and do not wait until the stone is severely damaged before polishing and maintenance.